 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4096, Rev A SPM6M060-010D Three-Phase MOSFET Bridge, With Gate Driver and Optical Isolation DESCRIPTION: A 100 VOLT, 60 AMP, THREE PHASE MOSFET BRIDGE ELECTRICAL CHARACTERISTICS PER MOSFET DEVICE (Tj=250C UNLESS OTHERWISE SPECIFIED) PARAMETER MOSFET SPECIFICATIONS Drain to Source Breakdown Voltage IC = 250 A, VGS = 0V Continuous Drain Current Pulsed Drain Current, 1mS Gate to Source Voltage Gate-Source Leakage Current , VGS = +/-20V Gate Threshold Voltage, IC=1mA Zero Gate Voltage Drain Current VCS = 600 V, VGE=0V Ti=25oC VCS= 480 V, VGE=0V Ti=125oC On-State Resistance, ID = 10A, VGS = 15V, Input Capacitance Output Capacitance Reverse Transfer Cap. VCS = 25 V, VGE = 0 V, f = 1 MHz Maximum Thermal Resistance Ciss Coss Cres RJC 3950 850 250 0.7 o SYMBOL MIN TYP MA X UNIT BVCSS TC = 25 OC TC = 90 C IDM VGS IGSS V GS(TH) O 100 - V ID - - 60 50 100 A A V nA V - - +/-20 +/- 100 2 - 4 ICSS 250 500 O A A V pF TC = 25 C RDSon - 0.012 0.015 C/W * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX 631 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * SPM6M060-010D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4096, Rev A Gate Driver PARAMETER Supply Voltage Input On Current Opto-Isolator Logic High Input Threshold Input Reverse Breakdown Voltage Input Forward Voltage @ Iin = 5mA Under Voltage Lockout ITRIP Threshold Voltage Turn On Delay Turn On Rise Time Turn Off Delay Turn Off Fall Time Input-Output Isolation Voltage (1) SYMBOL VCC HIN, LIN Ith BVin VF VCCUV ITRIPth tond tr toffd tf MIN 10 1.6 TYP 15 1.6 MAX 20 5 UNIT V mA mA V 5 1.5 7.0 0.4 1000 0.49 1.7 9.7 0.58 1000 100 1300 100 V V V nsec nsec nsec nsec V Maximum operating Junction Temperature Maximum Storage Junction Temperature Tjmax Tjmax -40 -55 - 150 150 o C C o (1) Once ITRIP reaches threshold, the driver latches off. This condition can be reset by holding all three low-side inputs high for more than 10 sec or by recycling the Vcc supply. * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX 631 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * SPM6M060-010D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4096, Rev A Package Drawing: 0.3 Min Power Pins =0.05" Signal Pins: =0.03" Spacing = 0.1" center-to-center Copper Base 14 1 0.22 0.80 0.125 0.275 = 0.2 1.5 1.4 0.53 0.295 Com +V 0.80 Ph3 14 0.80 Ph2 4 Ph1 0.40 1 0.75 0.50 0.235 0.20 0.475 0.21 x4 0.17 x8 2.60 3.15 3.62 0.10 x 13 Package Material: Base: Copper Frame: Nickel Lid: Plastic Power Terminals: Copper Signal Terminals & Truth Table: Signal Pins Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Function +15V PWR-GRND NC HIN1 HIN2 HIN3 SGN-GRND LIN1 LIN2 LIN3 SGN-GRND NC ITRIP ITRIP-RTN Gate Driver Truth Table HIN1,2,3 0 0 1 1 LIN1,2,3 0 1 0 1 HO1,2,3 0 1 0 0 LO1,2,3 0 0 1 0 Note: This device can be used with a noninverting input logic, if LIN and HIN are swapped. * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX 631 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * |
Price & Availability of SPM6M060-010D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |